Cass Technology CASTLE S SERIES User Manual

CASTLE S SERIES CONTROLLER – TECHNICAL OPERATION GUIDE
Clear Card Database
Press ‘5’ to select [5-Clr DB] menu from Database Menu.
This menu item it to delete all the cards installed in the controller.
After press ‘5’ at Database Menu, the controller will display as follow: -
The controller will prompt the user to confirm to clear the card database. If the user confirm
to clear the database, he/she just has to press ‘ENT’ key. The controller will clear all the
database in the controller.
To cancel ‘Clear Card Database’, press ‘ESC’ key.
Reset Anti-Passback Flag
Press ‘6’ to select [6-Rst A/p] menu from Database Menu.
This menu item is to clear the Anti-Passback flag. User cards with the Anti-Passback flag set
cannot access the system. These cards can be reset by clearing the Anti-Passback flag.
After press ‘6’ at Database Menu, the controller will display as follow: -
Reset Lock Out Flag
Press ‘7’ to select [7-Rst L/o] menu from Database Menu.
This menu is to clear the lock out flag. User cards with the lock out flag set cannot access the
system. These cards can be reset by clearing the lock out flag.
After press ‘7’ at Database Menu, the controller will display as follow: -
Return to Main Menu
Press ‘0’ to select [0-Main] menu from Database Menu to return to Main Menu.
CASS TECHNOLOGY SDN BHD(338857-X) 30
dd/mm DDD hh:mm:ss
Rst L/o (Y=ENT) ?
dd/mm DDD hh:mm:ss
Clear Card (Y=ENT) ?
dd/mm DDD hh:mm:ss
Rst A/p (Y=ENT) ?

Cass Technology CASTLE S SERIES Specifications

General

Brand	Cass Technology
Model	CASTLE S SERIES
Category	Controller
Language	English