CASTLE S SERIES CONTROLLER – TECHNICAL OPERATION GUIDE
Setting TimerSet
TimeSet is the time period setting activation of an operation.
In cardholder database, you use TimeSet to specify the valid time periods for the card to access the
system.
For example:
You may specify the TimeSet for the office as follows:
TimeSet #2
Interval #1 08:00 to 12.30
Interval #2 13:30 to 18:00
Interval #3 00:00 to 00:00
This allows the office staff accesses the system from 8:00am to 12.30 noon and from 1.30pm to 6pm.
In other words, if the office staff accesses the system within these periods of time, he/she will be
granted access. If it is outside these periods of time, he/she will not be granted access.
The Castle-S provides 98 TimeSet for you to program with.
The TimeSet 00 and 01 is the pre-fixed TimeSet.
00 = no access time being set
01= from 00:00 to 23:59
The TimeSet Setting can only specify the access time period for a particular day. To specify the
access time period for different day, you may use the Time Zone Setting.
Time Zone Setting is made up of TimeSet. You specify 9 TimeSet in each TimeZone Setting (one
for each day of the week plus 2 holidays). By, specifying the Time Zone Setting of a card, the
controller can then automatically control the different accessibility of the card from Sunday to
Saturday an Holidays.
The example below shows the use of time zone and time set to control the accessibility of the card.
Example:
Time Set Sample :
TimeSet #00 TimeSet #01
Interval #1 00:00 to 00:00 Interval #1 00:00 to 23:59
Interval #2 00:00 to 00:00 Interval #2 00:00 to 00:00
Interval #3 00:00 to 00:00 Internal #3 00:00 to 00:00
TimeSet #02 TimeSet #03
Interval #1 08:00 to 12:30 Interval #1 08:00 to 12:00
Interval #2 13:30 to 18:00 Interval #2 15:00 to 18:00
Interval #3 00:00 to 00:00 Interval #3 00:00 to 00:00
TimeSet #04
Interval #1 08:00 to 13:30
Interval #2 00:00 to 00:00
Interval #3 00:00 to 00:00
CASS TECHNOLOGY SDN BHD(338857-X) 21
To Next Page
Loading...
Need help?
General