Cass Technology CASTLE S SERIES User Manual

CASTLE S SERIES CONTROLLER – TECHNICAL OPERATION GUIDE
Press ‘4’ to select [4-Timers] menu from the system menu.
This menu item sets the Timer database. When user select this menu item, controller will display the
following: -
There are 100 timers available. Timer_00 and Timer_01 are pre-fixed sets, cannot be changed. Only
from Timer_02 to timer_99 can be set by the user.
User can use ‘0’ to ‘9’ to select which Timer he/she wants to update.
For example: -
To select Timer_12, press ‘1’ follow by ‘2’, the LCD will display as follow: -
Digits in the ( ) bracket are under focus.
S
This display shows the start time and the end time for the Timer_12, Interval_1. Each set of timer
has 3 intervals of start and end times. They are used in conjunction with TimeZones.
Use ‘0’ to ‘9’ keys to enter the start time and the end time. Repeat the step to proceed to Interval_2
and Interval_3. To clear the interval, set the start and end time to ‘0000’.
CASS TECHNOLOGY SDN BHD(338857-X) 22
dd/mm DDD hh:mm:ss
TimeSet No ? [01]
dd/mm DDD hh:mm:ss
I1(0000) - [0000]

Cass Technology CASTLE S SERIES Specifications

General

Brand	Cass Technology
Model	CASTLE S SERIES
Category	Controller
Language	English