Ordering Information A-9
Smart I/O Board
The Smart I/O board is a microprocessor driven PC board that allows the operation of a
number of I/O ports from an external serial line. The board can be controlled by RS-232
or RS-485. It can also be placed on an RS-485 bus with other Cavro pumps and smart
devices. The I/O signal is CMOS (0-5 volts). I/O lines include 16 inputs, 16 outputs, and
four analog inputs. The board uses a standard Cavro OEM communications protocol.
Cavro MiniWash
A compact, OEM module for rapidly aspirating or dispensing fluids, this module consists
of a control board and a small diaphragm pump attached to a small mounting frame
(similar to the Cavro Smart Valve). The module has many uses including: as a pump for
aspirating and/or dispensing fluids with a wash head; for rapidly pumping fluid through a
dispense probe for washing; and as a pump for moving fluid in and out of the Active
Wash Station.
Accessories
Tubing, syringes, evaluation power supply, and evaluation software are available for all
Cavro modules.
To Next Page
Loading...