CAVRO XP 3000 - Helpful Hints

Setting Up the XP3000 for Your Application 4-8
Helpful Hints
To maintain pump performance, keep the following in mind when operating the XP 3000:
❑ Wipe up all spills immediately.
❑ Pumping cold fluids may cause leaks, the result of differing coefficients of
expansion of Teflon and glass. Leaks may occur when pumping fluids that are at or
below 15
°C (61°F).
❑ To reduce the amount of carryover, a ratio of three parts reagent to one part sample
is recommended.
❑ Use organic solvents in the XP 3000 with caution. Using organic solvents may
reduce tubing and seal life.