Ⅱ
Ⅱ-34
THE CYLINDER HEAD ASSEMBLY
N0. PART NAME PART NO.
1.
VALVE (INTAKE) 40050133
2.
VALVE (EXHAUST) 40050134
3.
SPRING 40050135
4.
SPRING CAP 40050136
5.
COTTER 40056003
Please clean up correlative parts and lubricate with 10W/40 oil
1.Install valve spring (3) x4 on the valve spring washer
2.Install cotter (5) x2 on the spring cap (4) (4pcs)
3.Install assembled spring cap (4) on the spring , with jig press it
into the valve stem seals until a clear "click" sound was heard
4.check the cap is firmly installed on the stem with jig
ENGINE - Assembly
To Next Page
Loading...