Cectec KINGCOBRA - Pin; The Balancer Assembly

Ⅱ
Ⅱ-27
THE BALANCER ASSEMBLY
40128004BALANCER SHAFT ASSY.4.
40130083PIN3.
40150030GEAR (37T)
2.
RES009RETAIN E-RING
1.
PART NO.PART NAMENO.
1.Install pin (2) into balancer
shaft (1)
2.Install gear-oil pump driver
(3) into balancer ,
reference to figure A
3.Clip the E-ring (4) check the
retain E-ring ins
tall into the
groove of balancer shaft
ENGINE - Assembly