Ceia CMD - 5.3. Sensitivity Verification Using a Specific Target; Sss

CEIA CMD - Compact Metal Detector -- Fl 041 GB 140K5 v2 310 19
5.3. Sensitivity Verification using a Specific Target
The soil compensation procedure sets all detection parameters to the optimal operative value
permitted by the soil characteristics. Perform the following procedure to check the actual
detection capability.
LN |
Ep
= =: МӘРЕ: | | |
TH Poi
7
TARGET
BOX
|”
Ys
«Me (critt
Verify that the Specific Target is detectec
Switch to the Target Box. before starting the search operations
REMARKS
If operations are suspended and the detector is switched of,
the ground compensation procedure must be repeated.
When the detector is switched on again it resets to те defaut
settings.
A reset does not affect already established soil compensation
parameters.
This document is property of CEIA which reserves all rights. Total or partial copying, modification and translation is forbidden