Ceia CMD - Gleaning Ргосеаше

30
CEIA
CMD
-
Compact
Metal
Detector
--
Fl
041
GB
140K5
v2
310
6.2.2. Cleaning Procedure
In
case
the
unit
is
used
in
presence
of
dust,
sand
or
other
possible
heavy
environmental
conditions,
before
packing
it,
a
deep
cleaning
is
recommended,
to
prevent
the
moving
parts
from
possible
damages.
Procedure
| General cleaning.
| Clean all parts of the unit deeply,
| using a brush.
Cleaning the camlocks.
Clean the telescopic pole deeply,
using the brush. Open the levers and
clean the camlocks deeply, using the
brush. Check that the camlocks can
be operated correctly and without
excessive force. If necessary, clean
the camlocks again in both locked and
free position.
| Cleaning the handle.
Collapse the telescopic pole and
close the arm support, so as the
handle can be operated easily.
Clean the handle sliding zone deeply
in both collapsed and extended
position, using the brush. Check that
the handle can be collapsed/extended
correctly and without excessive force.
If necessary, clean again the sliding
zone with the handle in both collapsed
and extended position.
Final general cleaning.
Clean the detector using a slightly
moist, non-abrasive cloth.
желет
МОТЕ
=
|
..
Do
not
wash
the
device
with
liquid
detergents
or
chemical
substances!
This
document
is
property
of
CEIA
which
reserves
all
"eus.
Tote!
cx
тасым
copying.
modification
and
translation
is
forbidden.