Ceia CMD - Page 4

CEIA CMD - Compact Metal Detector
— FI 041 GB 140K5 v2 310
NOTES ON SAFETY DURING USE _
Correct
Operation
The CEIA CMD Metal Detector is a detector which can
Бе used to localize small or large metal masses. This
manual describes the ways of employing the detector.
but does not contain detailed information on general
precautions for specific applications: the operator must
have attended a specific course and have been
authorised to carry out such work.
The device must only be used by qualified personnel.
Before switching on the detector or putting on the
headphone, set the volume to minimum and adjust it so
that the ‘correct operation’ tone can be heard clearly.
Carry out the test with the reference sample provided
each time the device is switched on. This is to check
that the device is operating correctly.
=:
During operations, periodically test the detector's
efficiency by checking the sensitivity, using the specific
sample (target) on an area of the soil which is free of
other metal parts.
The CEIA CMD Metal Detector can be used on all types
of soil, even on those with a high metal content, The
detection depth is automatically optimised according to
the soil, following the compensation procedure, and also
depends on the quantity of metal contained іп the target
to be detected. Before starting operation, check the
detection depth after carrying out the compensation
procedure on the “Metal Free Area", using the
target with the minimum metal content.
After carrying out the soil compensation procedure
check the sensitivity of the detector using the specific
sample (target), to be detected at the desired detection
distance.
When moving over the soil, keep the height as comstent
as possible.
Move forward not more than half the length of the
sensitive part of the search head.
Pay attention to the position of the sensitivity
potentiometer, since this modifies the detection Gent of
the detector. Keep the sensitivity at the leve: necessary
to detect the specific sample (target).
Replace the batteries as soon as possible 7 he ios
battery signal (double beep) is heard.
Battery polarity: insert the batteries according io the
diagram on the bottom of the case.
This document is property of CEIA which reserves all
rights. Total or partial copying, modification anc Tisi = Soter