Operator ManualIndustrial Metal Detector THS/21
5FI 028 GB 2K8 v2
the device does not operate correctly, respect on how described in this -
manual;
the device has been stored for long periods in sub-optimal conditions; -
the device has suffered severe stress during transport; -
the device came into contact with corrosive substances. -
Do not supply the device when the Power Supply Box is open. Do not •
open during use.
1.1.3 – Maintenance warnings
Perform all maintenance operations following the procedures described in •
the Maintenance section of this manual.
The device must be disconnected from all power sources before •
undergoing any maintenance or cleaning, and before being moved.
Do not wash the device with liquid detergents or chemical substances. Any •
cleaning should be done using a slightly-damp, non-abrasive cloth.
Read the chapter on “Maintenance” carefully before calling the service •
centre. Whatever the problem, only specialised service personnel
authorised to work with CEIA equipment should be called.
To Next Page
Loading...
