Operator ManualIndustrial Metal Detector THS/21
7FI 028 GB 2K8 v2
1.3 – Residual risks
Before any movement of the detector, take care about the facts that it •
could be heavy to be handled by only one person. Establish and implement
adequate procedures to perform thi s operation. CEIA cannot be held
responsible for any damage resulting from incorrect procedures.
After the maintenance of devices provided with conveyor belt, make sure •
not to leave any tool (such as screwdrivers) on the belt since they can be
hurled on switching the device on.
Before starting the system, ensure that no one else is working on the •
machine.
To Next Page
