Operator Manual Industrial Metal Detector THS/21
6 FI 028 GB 2K8 v2
1.2 – Correct and Forbidden use of the device
1.2.1 – Correct use of the device
The THS/21 Metal Detector is an electronic device for the detection of •
metal masses (magnetic and non-magnetic metals) transiting inside the
detection antenna (only magnetic for THS/MN21 model).
Handle the device with care and without excessive force during installation, •
use and maintenance.
The final user is responsible for selecting the appropriate sensitivity for •
their application. After this selection has been made, and programming
has been adjusted accordingly, it is also the final user’s responsibility to
verify calibration using the test object(s) appropriate to the level of security
selected. Additionally, this test should be carried out periodically to ensure
no changes have occurred in the equipment.
The device is fitted with mechanical and electronic protections, described •
in this manual. Removing or reducing these protections is forbidden.
1.2.2 – Forbidden use of the device
The THS/21 Metal Detectors are not suitable to be installed or used in •
environments where could be present, even accidentally, an explosive
atmoshpere.
Electric arc welding shall not be carried out on the detector antenna, on •
the Control Power Box or on any part of the attached structure.
To Next Page
