CEM MARS 6 User Manual

27
11. Select the desired sample type [Organic, Inorganic, Water, Environmental (Digestion), Environmental (Extraction),
Environmental (Glass)].
12. If applicable, select “Sample Prep Notes.”
13. Using the keyboard, enter any specific notes for the method. Note: To toggle between upper and lower case
letters for the notes, select the “shift” key on the keypad. To toggle to numbers and symbols for the notes, select
“alt” on the bottom of the keypad. Use the backspace “del” (delete) key to delete unwanted letters and/or
numbers. To input a subscript, select the “sub” key. Use the space bar to enter a space in the notes. Once the
notes are properly displayed, select “Hide” to close the keypad.
14. Once the method is named and the control, vessel and sample type (if applicable) are selected, the following
screen will appear.

CEM MARS 6 Specifications

General

Type	Microwave Digestion System
Power Output	1600 W
Temperature Control	Yes
Pressure Control	Yes
Vessel Capacity	up to 40 vessels
Display	Touchscreen
Operating Pressure	up to 800 psi
Temperature Range	up to 300°C
Temperature Accuracy	± 1 °C
Power Supply	220-240 V, 50/60 Hz
Safety Features	Over-temperature and over-pressure protection
Power Consumption	1600W
Cooling Rate	Forced air cooling