• The accelerator pedal should be pressed and released slowly. The
accelerator pedal can be pressed and released slowly, and the electric
energy can be saved.
• During driving, strictly abide by traffic regulations and form good driving
habits.
• Before leaving the factory, the vehicle has been set with the speed limit
function according to the requirements of national laws and regulations.
Please avoid overloading and speeding during daily driving.
· During vehicle deceleration:
» During vehicle deceleration, try to use taxiing mode to facilitate the recovery of
electric energy.
» For non-emergency braking under normal conditions, just release the
accelerator pedal and lightly press the brake pedal to facilitate the motor to
produce the slow braking function.
• When gently stepping on the brake pedal only produces electric braking,
make sure that the brake pedal is pressed down all the time, and can't be
stepped down like the traditional vehicle.
• In case of emergency braking, press the brake pedal as quickly as traditional
vehicles to ensure the safety of pedestrians and vehicles.
• It is forbidden to use "N" gear for sliding.
• Do not slide in low speed for a long time.
· Gear shift
» The vehicle can select neutral gear (N), driving gear (D) and reverse gear (R)
according to different working conditions. When shifting gears, try to ensure
that the vehicle is stationary.
To Next Page
