• Reasonable gear selection can improve the power and economy of the
whole vehicle.
• When the vehicle is started, the transmission operates in the neutral position
for 3 to 5 minutes, and the gears, synchronizers and bearings of each gear
are fully lubricated through the gear rotation splash.
• Try to avoid emergency braking in high gear during driving to avoid gear
damage.
• When the vehicle cannot move, the fault judgment method related to AMT is
as follows:
» Please first make sure that the shift lever is not in forced neutral.
» Please confirm that the shift lever is powered on and correctly indicate the
corresponding gear.
» Please confirm whether the instrument display correctly displays the
LIFE value of AMT transmission. If not, please check whether the CAN bus
connection is normal.
» If all the above are normal, but the vehicle still cannot move, please
contact a professional to determine the fault.
Motor Cooling System
The flow of motor coolant inlet is 4 pus gal/min (15 L/min). The coolant is a mixture
of 50% ethylene glycol and 50% softened water. The coolant should be checked
frequently to ensure that the coolant is sufficient.
· If the coolant splashes on the skin, please wash it with clean water immediately.
If it splashes into the eyes, please wash it with clean water immediately and see
a doctor in time.
· When parking to check or add coolant, it is necessary to wait until the vehicle
cools to room temperature and then open the adding cover to avoid personal
injury caused by the splashing of heated coolant.
To Next Page
Loading...
