EasyManua.ls Logo

CENNTRO LOGISTAR 400 - Page 76

Default Icon
206 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
Features and Controls
65
Features and Controls
you can select "stop charging" to end the charging and enter the charging end
interface.
6. If manual charging is required, please click the manual charging menu to
enter the charging parameter confirmation interface. After setting the charging
parameters, click Charge.
7. In case of emergency, press the red emergency stop switch of the charging
cabinet, or turn the power switch directly below the charging cabinet to OFF,
turn off the working power of the charging cabinet, take the charging gun out
of the charging port of the vehicle, put it back into the charging cabinet, and the
charging is completed.
The charging operation shall be carried out by a designated person, who
shall receive operation training before taking the post.
It is forbidden to move the charging vehicle or conduct other operations
during charging.
It is forbidden to move and pull out the charging gun during charging.
It is forbidden for non-professional personnel to open the charging cabin
door at will and use sharp objects to operate on the display screen.
Emergency handling
» In case of abnormal conditions such as abnormal noise and smoke
during charging, the power supply shall be cut off immediately and the
professional personnel shall be informed for maintenance.
» In case of fire in the charging place, dry powder fire extinguisher or carbon
dioxide fire extinguisher shall be used.
» In case of abnormal operation of the charger, such as no response to
operation, fault alarm, air switch protection disconnection, etc., the power
supply shall be cut off in time and the professional personnel shall be
informed for maintenance and treatment.
Maintenance instructions for charging cabinet
· Routine maintenance can ensure that the charger is always in a good working
state, and fault diagnosis and maintenance can be completed by the design/
after-sales personnel or trained users to restore the charging cabinet to its
working state. Routine maintenance of charging cabinet mainly includes:
checking whether the fan works normally; checking whether the charging

Table of Contents

Related product manuals