12 – Monitoring T2S - ETH User Manual – v1.4
Introduction
5. Introduction
The T2S ETH stands for T2S Ethernet. It replaces the former T2S with the same form factor but with a front Ethernet
connector replacing the former USB one. Like his predecessor, T2S ETH is a monitoring solution for the full TSI inverter
range and is able to monitor up to 32 inverters through a friendly web base interface. T2S also supports Modbus Serial
communication (RTU) and SNMP v1 Communication.
This new monitoring device provides a graphical user interface, embeds a SNMPv2c/SNMP v3 agent and Modbus TCP
support with Catena, if one needs a touch screen display Catena can be connected to T2S ETH and is Compatible. It
also allows user to change the configuration of the system.
To Next Page
Loading...