29 – Monitoring T2S - ETH User Manual – v1.4
Graphical User Interface
7.4.8 Connections
As described before, T2S ETH has 2 digital inputs and 3 alarm relays.
State of each of these connections can be read through the “connections” page.
An extra button “toggle” allows the user to test each relay manually, toggling it for a few seconds with the aim of
detecting a mechanically failing device over the time.
7.4.9 Files
Three tabs are displayed in Files page.
Transfer tab gives user the opportunity
to download log file and configuration
file.
It’s also on that page that log file can be
cleared when it’s becoming too large.
Update tab allows user to install the
latest software version and get the
latest features. Software is available
through CE+T customer area in the
website (my.cet-power.com).
Software are provided in a proprietary
format called “*.saf” file. Once
uploaded, the system will restart,
installing the new application after
verifications.
Dedicated procedure will be provided at
the same location if needed.
To Next Page
Loading...
Need help?
General