CE+T Power T2S-ETH - SNMP V1 Traps; SNMP V3 Testing; Steps to Load CET MIB

9.4 SNMP V1 Traps
To check the SNMP V1 traps,
1. Click Tools > Trap Receiver on the menu bar.
2. You should have defined the IP address of the laptop running MIB Browser in the T2S ETH configuration in order
to retrieve trap.
9.5 SNMP V3 Testing
Snmpb-0.8.exe is the latest version of snmpb tool. Download the file from this URL https://sourceforge.net/projects/
snmpb/ and Run the exe to install the application.
9.5.1 Steps to Load CET MIB
1. Open the Application and navigate to Editor.
2. Open CET-TSI-MIB Paste it in the editor
3. Press Ctrl + S to save the file with the same file name
4. Open CET-TSI-SIM Paste it in the editor
60 – Monitoring T2S - ETH User Manual – v1.4
SNMP