To Next Page

To Previous Page

9.1.5.3 SNMP V2C trap settings

1. Port Trap Choose the port on which the trap is send and default port is port 162

2. Traps will not be received if the port number is changed.

3. Choose SNMP versions as SNMP V2C

4. Community for V2C traps can be ignored as V2C traps does not consider community name.

5. Trap version for T2S ETH is CET MIB Traps

6. Traps will not be received when UPS MIB Traps are selected.

9.1.6 SNMP V3 Conguration

SNMPv3 deﬁnes a secure version of SNMP and also facilitates remote conﬁguration of the SNMP entities. SNMP V3

conﬁguration is possible ONLY IF YOU HAVE A CATENA

Network Conﬁguration is same as SNMP V2C.

The three possible conﬁguration options are

• No Auth + No Encrypt: no authentication required, so anybody on the network can access or know what you’re

doing.

• Auth + No Encrypt: To have access one must be logged (authenticate). But anybody on the network knows

what he is doing by reading the network packets.

• Auth + Encrypt: must be authenticate AND all the network packets send are encrypted and thus, nobody know

what the user is doing except the user himself of course.

9.1.6.1 SNMP V3 Conguration No Auth + No Encrypt.

1. SNMP V3 can be conﬁgured when T2S ETH is connected to Catena

2. Login to T2S web page in Expert login

3. Click on button “Parameters” at the end of the page

4. Go inside “Monitoring” menu

5. Click on “SNMP” sub menu

6. Conﬁgure SNMP version under SNMP settings select v3 No Auth. + No Encrypt.

51 – Monitoring T2S - ETH User Manual – v1.4

SNMP

CE+T Power T2S-ETH User Manual

Questions and Answers: