2. Hold the cables upwards and slide the FIXING SCREW WITH
CABLE SLIT in the top most screw placement slot.
Ensure that the cable slit of the fixing screws faces
upwards.
Ensure that the cables run through the recess in
the screw head.
3. Guide the CABLES through the FIXING RING.
4. Push the FIXING RING on the handle set to fix the screw
in the position that matches the existing holes.
- While doing so, hold the CABLES tight, so that they do not
get pinched or jammed.
Ensure that the cables are not jammed by the fixing
ring!
Long shield ILS Page 23 of 141
4.5 Assembling basic version (for Long shield holes)
Overview: Master media usage
Help & troubleshooting Technical data Maintenance & disposal Operation Administration
Assembly
Basics
To Next Page
Loading...
