5. Insert the SQUARE SPINDLE in the coupling follower.
Make sure that the elongated hole is level.
Make sure that the ball of the square spindle in the
drill hole latched in the coupling follower.
6. Feed both cables into the INSTALLATION tube.
7. Run the cables with the help of the INSTALLATION TUBE
through the corresponding screw hole in the door.
- Turn the installation tube to and fro slightly while feeding
it in, so that it moves forwards more easily.
Page 24 of 141 Long shield ILS
4.5 Assembling basic version (for Long shield holes)
Overview: Master media usage
Help & troubleshooting Technical data
Maintenance & disposal
Operation Administration
Assembly
Basics
To Next Page
Loading...
