1. Guide the cables through the top elongated hole of
the ASSEMBLY PLATE .
2. Place the ASSEMBLY PLATE on the FIXING SCREWS and press
the square hole of the INSIDE LEVER HANDLE on the SQUARE
SPINDLE.
3. Use the Allen key TO SCREW THE Grub screw into the
inside lever handle, TO SECURE The square SPINDLE.
Page 26 of 141 Long shield ILS
4.5 Assembling basic version (for Long shield holes)
Overview: Master media usage
Help & troubleshooting Technical data
Maintenance & disposal
Operation Administration
Assembly
Basics
To Next Page
Loading...
