The outside fitting is now temporarily fixed, so that you
can continue with assembly of the inside fitting.
Assembly on the inside of the door
Depending on the size of the lock follower, you may
possibly need adaptor sleeve for the square spindle
(see "Adaptor sleeves for square spindle" on
page18). Use adapter sleeves in this case.
1. Run the cables through the right rosette hole of
ASSEMBLY PLATE OF THE INSIDE FITTING.
2. Place the ASSEMBLY PLATE on the FIXING SCREWS and press
the square hole of the INSIDE LEVER HANDLE on the SQUARE
SPINDLE.
Page 54 of 141 Long shield ILS
4.7 Assembling wide shield (for rosette-holes)
Overview: Master media usage
Help & troubleshooting Technical data
Maintenance & disposal
Operation Administration
Assembly
Basics
To Next Page
Loading...
