CEStronics CES OMEGA FLEX - Page 82

l Authorising master media for locking devices (see "Master media while using OMEGA Cli-
ent" below)
l Specifying opening duration of locking devices comfortably
A detailed manual is available in the OMEGA Suite Help.
In addition, OMEGA client offers further functions:
l Creating time profiles (see "Time profiles" on page64)
l Reading events (see "Events" on page65)
l Using the office function (see "Office-function" on page67)
l Specifying Validation intervals (for V-NET) (see "Validation of the locking media" on
page66)
l Specifying the validity of locking media (see "Validity of the locking media" on page65)
A detailed manual is available in the OMEGA Suite Help.
5.7.3 Master media while using OMEGA Client
5.7.3.1 Authorising master media via OMEGA Client
When you add master media to the OMEGA Client (see "Administration" on page61), then, along
with the new programming, these are also transmitted to the locking device and are thus
authorised for the locking device.
This applies to all master media except the Program-Master. Although this can be read into
OMEGA Client, it is not transmitted to the locking device (see "Dispensing with the use of
Program-Master" below).
Through the transmission of the master media from OMEGAClient to the locking device, all
master media which are not known to the software will also be deleted from the locking device. It
is therefore advisable to read the master media into OMEGA Client.
5.7.3.2 Dispensing with the use of Program-Master
If you are using the OMEGA Client, you should dispense with the Program-Master, because the
OMEGA Client itself acts as “Program-Master” while awarding locking authorisations. Since the
locking media can only be authorised and deleted by the same Program-Master, therefore,
although the Program-Masters can be read into OMEGA Client but cannot be transmitted to the
locking device.
It means that:
1. The authorisations assigned by Program-Master will not be displayed in
OMEGA Client. As a consequence, the locking plan displayed in OMEGA client is out of sync
Page 82 of 141 Long shield ILS
5.7 Use of the OMEGA Client software
Overview: Master media usage
Help & troubleshooting Technical data
Maintenance & disposal
Operation
Administration
Assembly Basics