PROPILOT 700
12
1.11 Off Course Warning
If the vessel remains Off Course by more than 15º for 20
seconds, or instantly if it reaches 30º, the display will flash to
warn the Helmsman that there is a problem.
1.12 Rudder Position Indicator
The LCD can display a readout of the position of the rudder.
Pr00 Press the ADJ key until the LCD displays the rudder
position indication. “Pr” indicates Port rudder applied, “Sr”
Sr03 indicates Starboard rudder applied. The figure is the rudder’s angle
in degrees from amidships. “Pr00” is displayed when the
rudder is amidships.
StOP When the rudder reaches its set limit of travel, the LCD will display
the message “StOP”.
Press the OFF key to return to Standby Mode.
In Auto Mode, press the AUTO key to return to Auto Mode.
While viewing the rudder position, the and keys
are still active. In Auto Mode, this means that pressing
the or key will cause the vessel to Dodge,
Change Course or Tack.
or
To Next Page
Loading...
