Cetrek PROPILOT 700 - Rudder Gauge Type; Reset All

43
7.15 Rudder Gauge Type
The ProPilot 700 outputs rudder angle information to a Rudder
Gauge connected to PL4 in the Pilot Computer.
rUd1 VDO Rudder Gauge
rUd2 Wagner Rudder Gauge
rUd3 Tfx Marine / SeaStar / Teleflex Rudder Gauge
RUd4 C-Power Rudder Gauge - Cetrek
7.16 Reset All
rESA When this message is displayed, pressing the and
keys simultaneously will clear the Rudder Settings and
Compass Alignment values.
The display will flash once when the values have been reset.
It is advisable to record the optimised settings, in case
they are accidentally changed at any time.