Need help?Do you have a question about the Cetrek PROPILOT 700 and is the answer not in the manual?
Overview of the control unit, LCD, keys, and functions like OFF, AUTO, NAV, ADJ.
Explains Standby Mode, Auto Mode, and Jog Steer for manual control.
Details how to engage Auto Mode and use functions like Dodge, Course Change, and Tack.
Covers Off Course Warning and Rudder Position Indicator displays and alerts.
Explains NMEA 0183 messages and selecting NMEA input sources for navigation.
Details engaging Navigator Control, Waypoint Sequence (Auto/Manual), and Cross Track Error display.
Steps to engage Navigator Control and how to cancel it to return to manual steering.
Explains the Response setting and how to adjust it for different sea conditions.
Details the Rudder Ratio setting and its impact on matching rudder movement to boat speed.
Covers the installation procedure, referencing manuals, and lists system specifications.
Details control unit placement and the process of mounting the ProPilot 700 unit itself.
Provides a wiring diagram and instructions for connecting the ProPilot 700 to the Pilot Computer.
Steps for first-time power-up, ensuring correct installation and connections.
Setting vessel type (PLAN, SAIL, etc.) and initiating the Rudder Settings Routine.
Detailed steps for setting Rudder Phasing, Motor Phasing, Rudder Limits, and Centre Rudder.
Process for aligning the compass and verifying all settings are correct.
Covers Automatic Compass Deviation Correction and Aligning the Compass.
Details Centre Rudder calibration and the Auto Sea Tune process for optimizing settings.
Performing final compass checks and fine-tuning the system using Auto Sea Trial.
Covers Rudder Deadband, Counter Rudder, and Trim settings for optimizing vessel response.
Details Navigator Gain, Waypoint Sequence, and Compass Damping adjustments.
Explains Transition Speed, Speed Display, and Motor Speed Control for steering performance.
Covers Spool Valve, Tack Angle, Power Steer Gain, Rudder Limits, Gauge Type, and Reset All.
Provides a summary of how each key operates in different modes like Standby and Auto.
Visual representations of the Navigator, Sea State, and Configuration routine menus.
Explains system messages like Low Battery, Navigator, and Wind Alarms.
Lists and explains various system fault codes and their potential causes.
A graphical template illustrating rudder angles for calibration and setup.
General| Brand | Cetrek |
|---|---|
| Model | PROPILOT 700 |
| Category | Marine Equipment |
| Language | English |
To Next Page
