45
Navigator Control
Key Display Function
NA1 Selects the NMEA Input (1-3)
AUTO Automatic Waypoint Sequence Display, or
not auto Manual Acceptance Sequence Display
}14 Cross Track Error Display
N226 Selects Navigator Control
Sea State Settings Menu
Key Display Function
rU04 Rudder Ratio (0-20)
Pr25Port Rudder Display, or
Sr10 Starboard Rudder Display, or
StOP Rudder End Stop
rE01 Response (1-20), or
AdPt Adaptive Setting
Configuration Routine Menu
Press and hold ADJ Key to select Configuration Routine.
Display Function
CONF Vessel Type Configuration 5.2
PLAN Planing, or
SAiL Sailing vessel
diSP Displacement, or
SdIS Semi-displacement, or
rudd Rudder Settings Routine 5.3
ALnC Align Compass 5.4 and 6.2
Continued \
To Next Page
Loading...
