Cetrek PROPILOT 700 - Default Chapter; Table of Contents

Contents
1. Using Your ProPilot 700 ....................7
1.1 The Autopilot Control ...................7
1.2 The Keyboard .........................8
1.3 Getting Started ........................9
1.4 Standby Mode (Manual Control of the steering) . 9
1.5 Jog Steer ............................9
1.6 Auto Mode (with the Control Option Compass) 10
1.7 Selecting Arrow Key Functions ............ 10
1.8 Dodge ............................ 11
1.9 Changing Course ..................... 11
1.10 Tack (with the Control Option Compass) ..... 11
1.11 Off Course Warning ................... 12
1.12 Rudder Position Indicator ................ 12
2. Navigator Control ....................... 13
2.1 NMEA 0183 Messages ................. 14
2.2 Using Navigator Control ................ 14
2.3 Selecting NMEA Input .................. 15
2.4 Waypoint Sequence ................... 16
2.5 Cross Track Error Display ................ 16
2.6 To Engage Navigator Control ............. 17
2.7 Cancelling Navigator Control ............. 17
3. Sea State Adjustments ................... 18
3.1 Response .......................... 19
3.2 Rudder Ratio ........................ 20
4. Installing Your ProPilot 700 ................ 21
4.1 Installation Procedure .................. 22
4.2 ProPilot 700 Specifications ............... 22
4.3 The Autopilot Control .................. 23
4.4 Mounting the ProPilot 700 ............... 23
4.5 Connecting The ProPilot 700 ............. 24
5. Dockside Settings ....................... 25
5.1 Step 1 Powering up for the First Time ...... 25
5.2 Step 2 Vessel Type Configuration ......... 26
5.3 Step 3 Rudder Settings Routine ........... 26
5.4 Step 4 Align Compass ................. 28
5.5 Step 5 Checking the Settings ............ 28