The information contained in this manual is believed to be accurate at the time of
going to print but no responsibility, direct or consequential, can be accepted by
Cetrek Ltd for damage resulting from the use of this information. Cetrek Ltd
reserve the right to make changes without notice to any of its products,
documentation or services. © Cetrek Ltd 1997
EMC Directive 89/336/EEC
This product has been designed to be compliant with the above
Directive.
Maximum performance and compliance with the EMC Directive can
only be ensured by correct installation. It is strongly recommended
that the installation conforms with the following Standards:
SMALL CRAFT - ELECTRICAL SYSTEMS:
a) ISO 10133 - Extra Low-Voltage DC Installations
b) ISO 13297 - Alternating Current Installations
ISO - International Standards Organisation
To Next Page
Loading...
