Cetrek PROPILOT 700 - The Keyboard

PROPILOT 700
8
Figure 2 - LCD Display
1.2 The Keyboard
OFF Key
• With the system powered up, this key selects Standby Mode.
AUTO key
• With the system powered up, this key selects Auto Mode.
and keys
• To dodge, Course Change or Tack in Auto Mode, depending on
selection.
• Jog Steer in Standby Mode.
• They change values in the menus.
ADJ Key
• This key selects; Response, Rudder Ratio and Rudder Position.
•A three second press of the ADJ key will display the Pilot
Configuration Menu
NAV Key
• This key selects NMEA Input and displays Waypoint Sequence
and Cross Track Error.
• This key engages Navigator Control.
Course Select Knob
• To Course Change in Auto Mode
• Changes value in some menus.