PROPILOT 700
34
If the vessel drifts off course to one side, increase the rudder ratio
by one.
If the vessel oscillates from side to side, decrease the rudder ratio by
one.
Figure 13 - Rudder Ratio
Do not make major adjustments.
Press the ADJ key repeatedly unitl "rU" is displayed for Rudder
Ratio and change the setting by using the or keys.
Press the OFF key to regain Manual Control. The ProPilot 700
installation is now complete.
It is advisable to record the optimised settings, in case
they are accidentally changed at any time.
To Next Page
Loading...
