Need help?Do you have a question about the CHAFFOTEAUX ARIANEXT COMPACT and is the answer not in the manual?
General| Brand | CHAFFOTEAUX |
|---|---|
| Model | ARIANEXT COMPACT |
| Category | Heat Pump |
| Language | English |
Symbols used in safety regulations.
Conditions that void the appliance warranty.
Compliance with CE directives.
Water quality requirements for optimal appliance performance.
Components included in the ARIANEXT COMPACT system.
Details on the data plate of the internal unit.
Details on the data plate of the external unit.
Guidelines for selecting the optimal location for the external unit.
Physical specifications and measurements of the external unit.
Required clearances around the external unit for installation.
Connecting the condensate drain and using pre-cut holes.
Physical specifications and measurements of the internal unit.
Hydraulic connections for the 1 Zone FSP internal unit.
Hydraulic connections for the 2 Zones FSP internal unit.
Connecting the 1 Zone internal unit to the system.
Connecting the 2 Zones internal unit to the system.
Information on managing available pressure in the system.
Procedures for cleaning the heating system.
Overview of the electrical circuit and connection requirements.
Connecting the external unit electrically.
Connecting the internal unit electrically.
Diagram illustrating the electrical connections.
Guidelines for positioning the system interface.
Steps for mounting the system interface on the wall.
Connecting the system interface to the internal unit.
Description of buttons and display elements on the control unit.
Meaning of different LED indicators on the control unit.
Steps to initiate and configure the system interface.
Parameters related to PACMAN configuration.
Configuration of the first energy manager parameters.
Configuration of the second energy manager parameters.
Settings for central heating operation.
Settings for domestic hot water functions.
Reviewing past system errors.
Options for resetting system settings.
Parameters for Zone 1 temperature control.
Specific settings for Zone 1.
Diagnostic information for Zone 1.
Configuration of Zone 1 module settings.
Parameters for Zone 2 temperature control.
Specific settings for Zone 2.
Configuration of Zone 2 module settings.
Parameters related to PACMAN configuration.
General user-configurable system parameters.
Configuration of the first energy manager parameters.
Configuration of the second energy manager parameters.
Settings for central heating operation.
Settings for domestic hot water functions.
Manual activation of system components (part 1).
Manual activation of system components (part 2).
Accessing test functions and utilities.
Diagnostic information for the heat pump (part 1).
Diagnostic information for the heat pump (part 2).
Diagnostic information for the energy manager.
Performance data for Application 30/35.
Performance data for Application 40/45.
Technical specifications of the external unit.
Operating range for the external unit.
Domestic hot water performance data.
Technical specifications of the system interface.
Installation guidelines for the outdoor sensor.
General checks to perform during maintenance.
Steps for performing a functional test after maintenance.
Procedures for draining the heating circuit and using antifreeze.
Guidance for informing the user about appliance operation and maintenance.
To Next Page
