35
SETTINGS
DUAL GATE SETTINGS
FEATURE PRIMARY OPERATOR SECONDARY OPERATOR
QUICK CLOSE Switch ON OFF
ANTI-TAIL Switch
ON OFF
EXPANSION BOARD
FEATURE PRIMARY OPERATOR SECONDARY OPERATOR
Timer-to-Close Set the TTC dial to desired setting OFF
Bi-Part Delay Switch
Bi-Part Delay: ON (will open last and close first)
Tandem Mode: OFF
Bi-Part Delay: OFF (will open first and close last)
Tandem Mode: OFF
NOTE: We recommend that all accessories and board configurations are set on the primary operator.
MAIN CONTROL BOARD
ACCESSORY PRIMARY OPERATOR SECONDARY OPERATOR
Remote Controls Program remote controls 1 to 50 to the primary operator. Program remote controls 51 to 100 to the secondary operator
LiftMaster Internet
Gateway
Program to primary operator.
Garage and Gate
Monitor
Program to primary operator.
To Next Page
Loading...
Need help?
General
