Chamberlain JDC - Table of Contents

2
Table of Contents
Safety Information 3
Safety Symbol and Signal Word Review..................3
Planning 4
Introduction 5
Voltage Selection .......................................5
Model Electrical Ratings
.................................5
Operator Specications 6
Operator Dimensions 7
Jackshaft (JDC) and Hoist (JHDC) .......................7
TDC Trolley
.............................................8
Battery Backup
.........................................9
TDC Trolley Operators 10
Carton Inventory ......................................10
Description
...........................................10
Hardware
.............................................10
TDC Trolley Assembly 11
Assemble the Operator ...............................11
Install the Chain
.......................................12
TDC Trolley Installation 13
Install the Header Bracket .............................13
Attach the Track to the Header Bracket and Hang the
Operator
..............................................14
Attach the Door Arm and Bracket
.....................15
Jackshaft (JDC) and Hoist (JHDC) Operators 16
Carton Inventory ......................................16
Description
...........................................16
Door Sprockets
.......................................16
JDC/JHDC Assembly 17
Congure the Operator ...............................17
Applying AC Power
....................................17
Battery Backup Wiring 18
JDC/JHDC Installation 19
Determine Mounting Location.........................19
Mount the Operator
...................................20
Secure the Chain Hoist
................................20
Manual Release 21
Emergency Disconnect System Model TDC ...........21
Emergency Disconnect System Model JHDC
..........21
Wiring 22
Power and Ground .................................... 22
Voltage Selection
.....................................22
Wall Controller Installation 23
Entrapment Protection 24
Monitored Entrapment Protection .....................24
Install the Monitored Light Curtain (Optional)
..........25
Cable Tension Monitors 26
Install the Cable Tension Monitor(s) (Optional) .........26
Testing 27
Test all Entrapment Protection Devices................ 27
Test Wall Controller Menu Access
.....................27
Test Limit Adjustment
.................................27
Wiring Diagram 28
Programming 29
Quick Start Commissioning ........................... 29
Manual Commissioning Program Flow
.................29
Operating Modes
.....................................32
Determine Operating Mode
...........................33
Determine and Set Operating Mode . . . . . . . . . . . . . . . . . . . 34
Programmable Inputs
.................................42
Radio
.................................................42
Programming Remote Controls and myQ® Devices
....42
Erasing Programmed Devices . . . . . . . . . . . . . . . . . . . . . . . . . 42
Reset Defaults
........................................42
myQ® Smart Facility Access
...........................43
Setup a myQ® Smart Facility Access Account
.........43
Provisioning Wi-Fi
.....................................43
Auxiliary Relays Accessory Kit (AUXREL) 44
Congure the Relay Adapter .......................... 44
Troubleshooting 45
Additional Troubleshooting............................45
Maintenance 62
Maintenance Schedule................................62
Accessories 63
Field Installable Accessory Kits 66
Service Parts 67
Model TDC............................................ 67
Model JHDC
..........................................68
Model TDC, JDC, and JHDC Common Parts
...........68
Warranty 69
MYQ® CONNECTIVITY
• myQ® Smart Facility Access Technology enables secure monitoring and control of door operators and other
myQ® Smart Facility Access devices with a smartphone, tablet or computer.
• Alerts can be received as email notications, ensuring the status of a commercial door.
SAFETY AND SECURITY
Security+ 2.0® – with every press of the button, a new code is sent to the commercial door operator, ensuring a door will
only open for the remote control programmed.
UL 325 requires all commercial door operators to be either constant pressure to close or be equipped with a primary
external monitored entrapment protection device.
LiftMaster® is the leading brand of professionally installed commercial door operators and access control products for
businesses worldwide. We are committed to quality products, innovative designs and comprehensive services which
exceed our Customers’ expectations.