Champion Eseries - Order of Assembly

26
7. Next, compare the site utilities with the utility connections
on the dishwasher.
The utility locations and ratings of the must match
the dishwasher when it is re-assembled in its
permanent location.
Contact a supervisor immediately if a utility location
does not match the
dishwasher.
8. Checkoorstability.Flooringmustsupporttheweightofthe
dishwasher without bowing when weight is applied.
 Tiledoorsmayfractureifloadsaredroppedonordrugacross
its surface.
9. Move the palleted sections near their permanent locations.
Remove protective coverings, shipping straps, brackets and
palletized accessories.
10. Inspect the underside of each section, (below the base) and
note the position of piping, valves, and other components that
may be in the way
11. Carefully lift each section off the pallet. Screw the adjustable
bullet-feet in as far as possible, then lower the section to the
nishedoor.
Order of Assembly
Installation Instructions
Order of Assembly