CHANGHE FREEDOM SERVICE MANUAL CLUTCH
REMOVAL
Removal of clutch presupposes that the
transmission has been dismounted according to the
method outlined in SECTION 9 TRANSMISSION.
Clutch Cover and Disc
1) Remove 6 bolts securing clutch cover to
flywheel and take off clutch cover and disc．
（A）：Special tool (Flywheel holder 09924-17810)
Clutch Release Bearing
2) Remove clutch release bearing from
transmission input shaft bearing retainer．
Input Shaft End Bearing
3) Use bearing remover (special tool)for
removal of this bearing．
1．Input shaft bearing
(B)：Special tool: Bearing remover 09917-58010
119
To Next Page
Loading...
Need help?
General