CHANGHE FREEDOM SERVICE MANUAL SEAT BELT AND AIR BAG SYSTEM
REMOVAL
WARNING：
The maintenance of the air bag
system should be dealt with by the
designated franchiser, if need to
dismantle, should operate according
to the following procedure.
Never
attempt disassembly of the air bag
(inflator) modules.,
Otherwise the injury may result.
● Pry open the side panel of
steering wheel gently with the truncate
opener.
● Unscrew the fore fixed bolts of the
air bag (inflator) module.
● Put air bag (inflator) module on
the workbench.
● Rotate the inflator/the sensor
about 40 degrees. Notice the black selling
slice and deviating from the steering wheel
hole.
● Take out the gas generator.
● Disassemble the steering spindle
nut.
● Take down the steering wheel.
334
To Next Page
Loading...
Need help?
General