CHANGHE FREEDOM SERVICE MANUAL SEAT BELT AND AIR BAG SYSTEM
INSPECTION
Seat belts and attaching parts can affect the bital components and systems of a vehicle.
Therefore,they should be inspected carefully and replaced with genuine parts only.
1） Seat belt
Its webbing or strap should be free from damage.
2） Retractor assembly
It should lock webbing when pulled quickly.
3） Anchor bolt
Anchor bolts should be torqued to specification.
4） Belt latch
It should be secure when latched.
SERVICE PRECAUTION
Before servicing or replacing seat belts, refer to following precautionary items.
1） Seat belts should be normal relative to strap retractor and buckle portions.
2） Keep sharp edges and damaging objects away from belts.
3） Avoid bending or damaging any portion of belt buckle or latch plate.
4） Do not bleach or dye belt webbing.(use only mild soap and warm water to clean it.)
5） When installing a seat belt anchot bolt by hand to prevent cross-threading.
6） Do not attempt any repairs on retractor mechanisms or retractor covers.replace
defective assemblies with new replacement parts.
7） Keep belts dry and clean at all times.
8） If there exist any part in question, replace such parts.
9） Do not put anything into trim panel opening which seat belt webbing passes through.
337
To Previous Page
Loading...
Need help?
General