CHANGHE FREEDOM SERVICE MANUAL GENERAL INFORMATION
z Whenever you use oil seals, gaskets, packing, oil
rings, locking washers, split pins, self-locking nuts, and
certain other parts as specified, be sure to use new ones.
Also, before installing new gaskets, packing, etc., be
sure to remove any residual material form the mating
surfaces.
z Make sure that all parts used in reassembly are
perfectly clean.
z When use of a certain type of lubricant, bond or
sealant is specified, be sure to use the specified type.
“A”：Sealant 99000-31150
z Be sure to use special tools when instructed.
Special Tool
（A）：09917-98221
（B）：09916-58210
z When disconnecting vacuum hoses, attach at tag
describing the correct installation positions so that the
hoses can be reinstalled correctly.
z After servicing fuel oil , coolant, vacuum, exhaust
or brake systems, check all lines related to the system
for leaks.
z For vehicle equipped with fuel injection systems,
never disconnect the fuel line between the fuel pump
and injector without first releasing the fuel pressure, or
fuel can be sprayed out under pressure.
5
To Next Page
Loading...
Need help?
General