3.5.6 Display at the end of a treatment
Note
- For programs using the mi-range feature the percentage of time spent above the minimum
threshold will be displayed as well.
- To turn the unit o, press the On/O button on the remote control for more than 2 seconds. This
will switch o as well all modules.
A Average energy level of all the channels used during the contraction phase
B Maximum energy level achieved by the channel during contraction phases
C Back to main menu (HOME). For programs using the mi-range feature the percentage of time spent
above the minimum threshold is displayed.
A
B
C
To Next Page
Loading...
