. CARE, MAINTENANCE, TRANSPORT, ENVIROMENTAL STATEMENT
Caution!
Equipment damage -
Only use the original shipping box for shipping the device. DJO cannot be held liable for
transport damage if the device is not packed in its original shipping box.
1. Prepare the device and its components for shipping within the original Wireless Professional shipping
box, by following the guidlines given previously.
2. Place the components within the box like shown in the pictures below.
a. Place at the bottom the electrodes and user guide on CD in the specific box
b. Cover the electrode and user guide with the paper spacer
c. Place the docking station in a specifi box and insert it in the room allowed by the paper spacer
d. Put the Remote Control and module in its separate foam box, put it into the paper spacer and cover
the docking station box. Cover the Docking Station with the protective paper peace and place it in
the box.
e. Close the Transport Box
8.3.4 Shipping the entire 2CH unit (incl. Basic Docking Station)
To Next Page
Loading...
