This is a sample email:
Dear John Doe,
You are invited to activate your security services
using the Security Appliance.
Once connected, you will be fully protected by a
comprehensive security solution that will secure
your assets and minimize the risks of a data
breach.
Click http://myfirewall:443476382020.
If the First Time Configuration Wizard for the
Security Appliance appears, follow the initial
setup instructions in your Getting Started Guide.
If the above activation link doesn't work, do the
following:
On a computer connected to the Security
Appliance, browse to the Security Appliance
management interface:
http://myfirewall:4434.
Go to the Home tab and select Cloud Services.
Click on the Configure button.
Copy your activation key
smbmgmt.provisioning.local&Sample-Gateway.d
omain.Prime&6382020 to the Activation Key
field.
Click Apply to connect.
Your appliance will connect to
smbmgmt.provisioning.local&Sample-Gateway.doma
in.Prime (Gateway ID) using the key 6382020
(registration key).
Thank you,
Service Center security team
To Next Page
Loading...
