Zero Touch Cloud Service
The Zero Touch Cloud Service lets you easily manage the initial
deployment of your gateways in the Zero Touch portal
https://zerotouch.checkpoint.com.
Zero Touch enables a gateway to automatically fetch settings
from the cloud when it is connected to the internet for the first
time.
Note - If you already used the First Time Configuration Wizard
to configure your appliance, you cannot use the Zero Touch
Cloud service. If you start the First Time Configuration Wizard
while the Zero Touch settings are being installed, the
installation process terminates.
If the gateway connects to the internet via DHCP, the gateway
will fetch the Zero Touch settings without any additional action.
If no DHCP service is available, you must run the First Time
Configuration Wizard, configure the Internet Connection
settings, and then fetch the settings from the Zero Touch
server.
To Next Page
Loading...
