Authentication Details
In the Authentication Details page, enter the required details
to log in to the Check Point 730/750 Appliance WebUI
application or if the wizard terminates abnormally:
• Administrator Name - We recommend that you change the
default "admin" login name of the administrator. The name
is case sensitive.
• Password - A strong password has a minimum of 6
characters with at least one capital letter, one lower case
letter, and a special character. Use the Password strength
meter to measure the strength of your password.
Note - The meter is only an indicator and does not enforce
creation of a password with a specified number of
characters or character combination. To enforce password
complexity, click the check box.
• Confirm Password - Enter the password again.
• Country - Select a country from the list (for wireless
network models).
To Next Page
Loading...
