Check Point 730 - Setting Outgoing Services; Configuring Applications and URL Filtering

99
Setting Outgoing Services
To set outgoing services in a Standard policy:
Click all services.
To allow specified services only:
1.
Click Block all outgoing services except the following.
2.
Select the services to allow.
To allow all services
1.
Click Allow all outgoing services.
2.
Click Apply.
Configuring Applications and URL
Filtering
The Applications & URL Filtering lets you define the access
policy for Internet applications and websites. Select if you want
Applications & URL Filtering to be On, Off, or URL Filtering
only.
You can select which categories and applications to block.
Security risk categories and applications are blocked by
default.