Check Point 730 - Wireless Network

76
Wireless Network
This applies to Wireless Network models only.
In the Wireless Network page, configure wireless connectivity
details.
When you configure a wireless network, you must define a
network name (SSID). The SSID (service set identifier) is a
unique string that identifies a WLAN network to clients that try
to open a wireless connection with it.
We recommend that you protect the wireless network with a
password. Otherwise, a wireless client can connect to the
network without authentication.
To configure the wireless network now:
1.
Select Configure wireless network now.
2.
Enter a name in the Network name (SSID) field. This is the
name shown to clients that look for access points in the
transmission area.
3.
Select Protected network (recommended) if the wireless
network is protected by password.
4.
Enter a Password.
5.
Click Hide to conceal the password.
6.
Allow access from this network to the local network is
selected by default. Clear if it is not necessary. If this
option is selected, the wireless network is considered
trusted and access by default is allowed from it to the local
network.