Check Point 730 - Firmware Upgrades

92
3.
Select Recurrence:
• Daily
• Weekly
• Monthly
4.
Click Apply.
Firmware Upgrades
To see notifications of available upgrades:
1.
Click the status bar.
We recommend you configure automatic upgrades.
2.
Move the cursor over the notification to show the version
number.
3.
Click Upgrade Now or More Information.
To configure automatic upgrades:
1.
Go to Device > System Operations.
2.
Click Configure automatic upgrades.
The Automatic Firmware Upgrades window opens.
3.
Click Perform firmware upgrades automatically.
4.
Click Upgrade immediately or Upgrade according to this
frequency.
5.
Click Apply.
Note - If the gateway is configured by Cloud Services,
automatic firmware upgrades are locked.